Samsung 46UE Setup Manual page 11

2. Correcting height difference between upper and lower monitors.
• If you turn the fine-tuning screw on the bottom of the monitor clockwise or counterclockwise, the monitor will move
up or down respectively.
The fine-tuning screw's maximum movement range is 10 mm.
<Lowering the monitor>
TO ADJUST THE HEIGHT DIFFERENCE BETWEEN
THE MONITORS ON THE UPPER LAYER,
1. Move upward a monitor and leave enough space to fit in your hand below the monitor.
2. Rotate the monitor, unfold the holder attached to the bracket and fix the monitor in the holder.
3. Turn the fine-tuning screw to correct the height difference.
4. Repeat steps 1~3 till you obtain the optimum result.
* Be careful not to catch your fingers.
* Ensure the holder is fastened to the wall-mount bracket ⓑ.
* Note that the holder is not compatible with some monitor models.
BN68-01537H-00.indb 9
<Raising the monitor>
English 9
Fixing the monitor
in the holder
2012-10-29 오후 5:23:02