GE Appliances
JBS03H – GE
30" Free-Standing QuickClean
®
Dimensions (in inches)
29-7/8
29-7/8
46-1/2
†
1/4
46-7/8
26-1/4*
1/4
46-1/4
26-3/8*
46-3/8
Specification Revised 11/05
321670
7-1/2
REAR
WALL
2-1/4
†
The range may be placed with a 0"
†
clearance (flush) at the back wall and
side walls if the range side trims extend
beyond the cabinet fronts at least 1/4" .
Self-Clean models only.
*Dimensions from wall to front of closed oven door
handle is 28" .
Electric Range
™
7-1/2
7
5
3-1/2
2-1/4
CENTER LINE
KW Rating
240V
11.4
208V
9.0
Breaker Size
40 Amps
†
Note: Check local codes for required breaker size.
†
Effective January 1, 1996, the National Electrical Code requires that new
construction (not existing) utilize a 4-conductor connection to an electric range.
Receptacle Locations: For 30" Free-Standing Ranges locally approved flexible
service cord or conduit must be used because terminals are not accessible
after range installation. See shaded area in drawing for location of electrical
outlet box. Recommended outlet locations allow range to be installed directly
against wall.
Note: 30" Ranges conform to U.L. requirements for 0" spacing for adjacent walls
below countertops. To reduce possibility of scorching walls, it is recommended a
minimum of 1-1/2" spacing be allowed from adjacent side walls to allow for
possible extended, high-heat, no-load heating element operation.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
For answers to your Monogram,
GE Profile
®
GE
appliance questions, visit our website at
®
GEAppliance.com or call
GE Answer Center
service, 800.626.2000.
®
R
or
™