Husqvarna 36 Workshop Manual page 78

Saws 281XP and 288 XP.
Fit the oil pump as follows:
1. Apply SAE 30 oil to all moving parts
2. Fit the seal (E) if necessary.
3. Fit the plug (B) and spring with washers
on the pump piston (C) and fit the unit
in the pump housing.
4. Fit the adjuster screw (A) in the pump
housing, and through the hole in plug
(B).
5. Fit the O-rings (D) and (F).
Saw 394.
Fit the oil pump as follows:
1. Apply SAE 30 oil to all moving parts.
2. Fit the pump piston (C) with washers
and spring in the pump housing.
3. Fit the latch pin (B), press in the pump
piston (C) a little more and fit the
adjuster screw (A).
4. Fit the seal (E).
5. Fit the plug (D).
78
– English
LUBRICATION SYSTEM
See continuation, page 80.
F
A
See continuation, page 80.
A
C B
D
E
C D
B
E