Setting The Rear Output And Subwoofer Controller - Pioneer DVH-P7000R Operation Manual

Section
Initial Settings
11
Setting the rear output and sub-
woofer controller
This unit's rear output (rear speaker leads out-
put) can be used for full-range speaker (
) or subwoofer (
SP:FULL
tion. If you switch rear output setting to the
, you can connect a rear speaker lead
SP:S.W
directly to a subwoofer without using an auxil-
iary amp.
Initially, the unit is set for rear full-range speaker
connection (
Rear SP:FULL
When rear output are connected to full range
speakers (when
can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller's (low pass
filter, phase) built-in
auxiliary
S.W Control:EXT
Notes
• Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 67) or subwoofer output
(refer to page 66) in the audio menu on.
• If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
• Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1 Press to select
F
Press repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
82 En
) connec-
Rear SP:S.W
).
is selected), you
Rear SP:FULL
or the
S.W Control:INT
.
.
SW
appears in the
Rear SP
on the head unit also
2 Change the rear output setting with E or
e.
Pressing E or e will switch between
(full-range speaker) and
:FULL
(subwoofer) and that status will be displayed.
Rear
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Rear
Notes
• When no subwoofer is connected to the rear
output, select
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
3 Change the subwoofer controller with 1
or ¡.
Pressing 1 or ¡ will switch between
Control :INT
status will be displayed.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Rear SP :S.W
.
Rear SP:FULL
Rear SP:S.W
Rear SP:S.W
and and that
S.W Control :EXT
Rear SP
.
,
S.W