Motorola DCH3200 Installation Manual page 16

2 OVERVIEW
The Format button is intended to allow you to select a video output format that is
compatible with a connected display device. Some televisions may not support all four
video formats listed above. The Format button provides an easy method for selecting an
output format that is compatible with your television.
Operation
The Format button is intended to complement the User Settings Menu (see User Setting
Status). It is not intended to replace the User Settings Menu. The User Settings Menu is
the preferred method of optimizing the DCH3200 to operate with your specific
television.
If you cannot get a video display when the DCH3200 is connected to your television via
Component Video or HDMI cables, use the Format button to select a video output
format that results in a viewable picture on the display screen. Once a viewable picture
is available, please use the User Settings Menu to optimize the DCH3200 display
settings for your specific television.
Video Format Indicators (Front Panel Display)
The front panel display of the DCH3200 is equipped with four indicators to the right
hand side of the display that are used to indicate the currently-selected video output
format on the Component Video (YPbPr) and HDMI outputs. As the Format button is
depressed, the front panel format indicators will change to illuminate the currently
selected video output format in use by the DCH3200.
Note: There are some scenarios where the DCH receiver does not change the video
output format if the Format button is depressed. In these scenarios, the DCH3200 will
flash the currently illuminated video format indicator on the front panel display. If this
should occur, please use the User Settings Menu to make further changes to the video
output settings of the DCH3200 receiver.
*The availability of certain features is dependent upon application support.
6