735 Feeder Relay
The 735 Metering screen shows:
• Current and Output Relays
• Time Overcurrent Trip and Instantaneous Overcurrent Trip
• Configuration
The RESET/CLEAR Device button will issue a RESET command to 735.
200
The Events and Wave function buttons below the Info box are disabled since the 735
does not support Waveform Capture or Event generation.
The 735 Tabular Data Screen wizard has two command buttons, described below.
Tab
Button
Metering
Reset Device
Trip
Clear Last Trip Data
Table 28. 735 Tabular data screen commands.
Metering Tab
Function
Issues a RESET command to the 735
Clears the trip causes log
PMCS Interface Toolkit