Yamaha WR450F Owner's Manual page 18

INSTRUMENT AND CONTROL FUNCTIONS
1 2
1
2
3
3
1. Stopwatch indicator "
4
2. Tripmeter A indicator "
pensation tripmeter "
5
3. Tripmeter B indicator "
TIP
6

The multi-function display can be
set to the basic mode or the mea-
7
surement mode.

Tripmeter A will automatically re-
set to zero when changing from
8
the basic mode to the measure-
ment mode or vice versa.
9
Basic mode:

a speedometer

an odometer

two tripmeters (which show the
distance traveled since they were
last set to zero)

a clock
Measurement mode:

a speedometer

a distance-compensation tripme-
ter (which shows the accumulated
distance traveled since set to zero
and which can be calibrated to pro-
vide a more accurate tripmeter
"
reading)
"/Distance-com- 
a stopwatch (which shows the time
"
that has been accumulated since
"
the start of stopwatch measure-
ment)
TIP

Be sure to push the main switch to
"ON" before using the "SLCT 1",
"SLCT 2" and "RST" buttons.

When the main switch is pushed to
"ON", all of the display segments
of the multi-function display will ap-
pear and then disappear, in order
to test the electrical circuit.

For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "SLCT 2" but-
Basic mode
Odometer and tripmeter modes
Push the "SLCT 2" button to switch the
display between the odometer mode
and the tripmeter modes A and B in the
following order:
odometer  tripmeter A  tripmeter B
 odometer
1. Tripmeter A indicator "
3-3
ton until the display changes after
the main switch is pushed to "ON".
1
"