I Using Smartstart To Configure Storage - HP 3PAR StoreServ 7200 2-node Manual

Part I Using SmartStart to Configure Storage
1. Gather the information you will need to use SmartStart to
configure your HP 3PAR StoreServ 7000 Storage system.
2. Learn more about how HP 3PAR storage systems work.
NOTE: If you are not familiar with HP 3PAR storage systems,
HP highly recommends that you read this short introduction.
3. Set up the Service Processor and the HP 3PAR StoreServ 7000
Storage system.
4. Connect to your new storage system.
5. Configure Fibre Channel host connections or iSCSI host
connections.
6. Create storage and add the ability to use virtual volumes on
Microsoft Windows Server 2008 R2 and Windows Server
2012 server host systems.
7. Install the HP 3PAR Management Console in order to manage
storage and access additional features and functionality.
"Prepare to Configure" (page 9)
"Understanding Storage" (page 40)
"Setting Up the Service Processor" (page 13)
"Setting Up the HP 3PAR StoreServ Storage System" (page 17)
"Connect to the HP 3PAR StoreServ 7000 Storage System"
(page 22)
"Configure the Hosts" (page 23)
"Configure Storage" (page 31)
"Install the HP 3PAR Management Console" (page 39)