Display Settings Menu - HP Integrity Superdome 2 16-socket User Manual

Display Settings menu

IMPORTANT:
no settings are changed. If you cancel out of the Display Settings without entering the correct login
information, the door display will continue to show the "Login and Setup Info is required" message.
The Display Settings menu has the following options:
Door Display Setup— Runs the initial setup of the Door Display.
Disable Display— Erases all settings. A screen saver immediately appears for one hour, and
then the Door Display shuts off.
IMPORTANT:
names and passwords before you can use the Door Display.
Calibrate Screen— Enters calibration mode for the touch screen.
IMPORTANT:
Using a finger is not precise enough to properly calibrate the screen.
Do not use metal objects to calibrate the screen. Using a metal object might damage the LCD
touch screen.
Firmware Update— Use this option to update the Door Display firmware. The current status
of the Door Display firmware is displayed on the menu button. The firmware status is one of
the following:
◦
Setup required first— The initial Door Display setup has not been completed and the Door
Display is unable to access firmware status.
◦
Up-to-date— The current Door Display firmware matches the current revision available
on the OA. No firmware update is required. If necessary, the Door Display firmware can
be reloaded using the Firmware Update menu.
38 HP Superdome 2 Door Status Display
Accessing the Display Settings screen requires a valid door display login even if
If you select this option, you must re-enter all setting information, such as user
HP recommends using a stylus or the back of a pencil to calibrate the screen.