Charging The Battery - HP ac200w User Manual

2.3 Charging the Battery

You can charge the battery using the micro USB cable that came with the
camcorder. Follow the steps below to charge the battery.
1. Install the battery into the battery compartment.
2. Plug the micro-USB
connector to the USB port of
your device.
3. Plug the other end of the USB
cable to a computer.
The battery LED blinks red. After a full charge, the LED turns off.
Approximate charging time is 240 minutes with a USB connection.
Actual charging time depends on current battery capacity and
charging conditions.
You may also use the supplied
AC adapter to charge your
camera battery.
12