Applying The Qos Policy To An Interface; Applying The Qos Policy To Online Users - HP 6125G Configuration Manual

If a QoS policy has been applied to an active user profile, you cannot modify classes, behaviors, and
class-behavior associations of the QoS policy, or delete the QoS policy.

Applying the QoS policy to an interface

A policy can be applied to multiple interfaces, but only one policy can be applied in one direction
(inbound or outbound) of an interface.
The QoS policy applied to the outgoing traffic of a port does not regulate local packets, which are critical
protocol packets sent by the device for maintaining the normal operation of the device. The most common
local packets include link maintenance packets, STP, LDP, and RSVP packets.
To apply the QoS policy to an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Apply the policy to the
interface.

Applying the QoS policy to online users

You can apply a QoS policy to multiple online users. In one direction of each online user, only one policy
can be applied. To modify a QoS policy already applied in a certain direction, remove the QoS policy
application first.
Configuration restrictions and guidelines
The QoS policy applied to a user profile supports only the remark, car, and filter actions.
•
Do not apply a null policy to a user profile. The user profile using a null policy cannot be activated.
•
The authentication methods available for online users include 802.1X and Portal.
•
Configuration procedure
To apply the QoS policy to online users:
Step
1. Enter system view.
2. Enter user profile
view.
3. Apply the QoS
policy.
Command
system-view
interface interface-type interface-number
qos apply policy policy-name { inbound
| outbound }
Command
system-view
user-profile profile-name
qos apply policy policy-name
{ inbound | outbound }
22
Remarks
N/A
N/A
N/A
Remarks
N/A
The configuration made in user profile view takes
effect when the user profile is activated and the
users of the user profile are online.
For more information about user profiles, see
Security Configuration Guide.
Use the inbound keyword to apply the QoS policy
to the incoming traffic of the device (traffic sent by
the online users). Use the outbound keyword to
apply the QoS policy to the outgoing traffic (traffic
received by the online users).