Placing Originals On The Glass - Hitachi DDC 35N Operator's Manual

2-20
5. Placing Originals

Placing Originals on the Glass

Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a Document Feeder, see p. 2-17.
Sheet Originals
<Using originals not suitable for the document
feeder>
Raise the Original Cover or Document
1
Feeder and place the original face down on
the glass.
Align the rear right corner of the original
2
with the marker on the Width Scale of the
original glass.
Gently lower the Original Cover or
3
Document Feeder.
Highly Transparent Originals
<Using transparencies and translucent paper for
the original>
Place the original in the same way as the
1
sheet originals.
Place a blank white sheet of paper of the
2
same size over the original.
1166O027AA
Gently lower the Original Cover or
3
Document Feeder.
1166O192AA
1166O028AA