Removing Jams From Zone A - Hitachi DDS 32 Quick Reference Manual

Removing Jams from Zone A

1
Printer without Trayless Duplex
1. Open the upper left cover. Remove any paper found.
2. If the Trayless Duplex is installed, first open the Trayless Duplex, then open the left cover.
If the Envelope feeder is installed, remove it first, before attempting to clear the jam.
6
3. If the leading edge of the paper is already in the paper output tray, pull the paper in the direction of
the arrow.
4. If paper is jammed in this area, pull in the direction of the arrow.
5. For paper in the fuser area, pull out carefully without touching the fuser. If paper is difficult to pull
out, turn the knob continuously in the direction of the arrow until the paper can be pulled out easily.
6. Close the upper left cover.
7. Open the tray being used and remove any jam found.
8. Close the tray. (Not shown.)
Warning!
Do not touch the fuser area (where the high temperature label is located). Burns may result.
Quick Reference Guide
2a
4 3
2b
Printer with Trayless Duplex
4
High Temperature Label
7
5
11