Table of Contents
Advertisement
Changing the Imaging Unit
1
Unlock and open the Right Door.
NEVER touch the electrical contacts
inside the right door and underneath the
Imaging Unit, as an electrostatic discharge
may damage the copier.
2
Holding onto the green hooks at the front and
rear of the Imaging Unit, carefully pull out the
old Imaging Unit. Then, holding onto the
handle on the top side of the Imaging Unit,
take the Imaging Unit out of the copier.
3
Shake the new Imaging Unit horizontally.
Align the green labels on the new Imaging
Unit with those on the rails in the copier, then
slide the Imaging Unit into the copier.
4
Holding onto the green hooks of the Imaging
Unit, push the Imaging Unit all the way into
the copier until a click is heard. Close the
Right Door.
CAUTION
Electrical Contacts
17
1166O158AA
1166O264AB
1166O0159AA
1166O254AA
Advertisement
Table of Contents
