Childproof Lock - Siemens 
D12-52 Operating And Installation Instruction

Childproof lock

Activating the
childproof lock
Example of Easy Care 40 ºC
programme:
Deactivating the
childproof lock
You can secure your washer dryer to prevent
selected functions from being inadvertently changed.
If the childproof lock has been selected:
- no changes can be made while the programme is
running,
- the symbol G flashes if a programme setting is
inadvertently changed,
- should the appliance be switched off and on while
a programme is running, the programme will
continue at the point at which it was interrupted,
- when the programme ends, the duration time is
showed as 0:01, the loading door cannot be
opened, deactivate the childproof lock, the door
can be opened while the display shows 0 .
q Set the programme selector to the required
programme and, if required, select other settings.
q Load the laundry and close the loading door.
q Touch the Start/Pause button. The programme
starts.
i Release the Start/Pause button.
q Touch the Finish in button and hold down (for
approx. 5 seconds) until the G symbol is
displayed.
q Release the Finish in button, the childproof lock is
activated, the symbol is permanently on.
The childproof lock must be deactivated before
making programme changes or ending programmes.
The childproof lock can only be deactivated if the
programme for activating the childproof lock has been
selected. The G symbol will continue to flash if a
different programme has been selected.
q Touch the Finish in button and hold down (for
approx. 5 seconds) until the G symbol goes out.
i If there is a power failure, the childproof lock
remains on.
35