Configuring the CodeMaster 100
To set the time on the CodeMaster 100:
Example
1
2
3
4
5
6
7
8
9
10 Press ECG Size until the minutes setting contains the correct time.
11 Press Lead Select.
12 Depress both sides of the ECG Size key simultaneously to return to the
13 Turn the Energy Select control to Off.
2-10
Press Sync and HR Alarm at the same time while turning the Energy Select
control from Off to Monitor On.
Press
ECG Size once to highlight SETUP MENU 1.
Press Lead Select. SETUP MENU 1 appears.
Press
ECG Size seven times to highlight Time.
Press Lead Select.
Press ECG Size until the hours setting contains the correct time.
Press Lead Select.
Press
ECG Size to select minutes.
Press Lead Select.
Setup/Diagnostic Menu.