Wireless Communication Switch - Toshiba DX1210 series User Manual

LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
■
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
■
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "Allow the device to wake the computer" check box within the LAN
Device properties. (This feature does not effect the Wake-up on LAN
from sleep or hibernation.)
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function.
Enabled
Disabled
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled

Wireless Communication Switch

This feature enables or disables the Wireless Communication Switch.
ON
OFF
User's Manual
Enables Wake-up on LAN from shutdown.
Disables Wake-up on LAN from shutdown
(Default).
Enables Built-in LAN functions (Default).
Disables Built-in LAN functions.
Enables Wireless Communication Switch
(Default).
Disables Wireless Communication Switch.
HWSetup
7-4