Installing Vbcollector; Starting Up Vbcollector; Registering A Server - Canon VB-C50Fi User Manual

Using VBCollector

Installing VBCollector

If you selected Custom Installation described in "Install the Software" in Chapter 2 "Setting up"
(→ P.2-11) and selected [VBCollector], VBCollector will already have been installed. If this is the
case, select "Programs" from the Start menu, then "WebView Livescope" and a short cut will be
created.
If VBCollector is not yet installed, see page 2-11 to install.
VBCollector cannot be installed on a PC where MV Ver. 2.0 or a later version is
already installed.
Note

Starting Up VBCollector

VBCollector is started up by choosing it from Start menu.
○ ○ ○ ○ ○ ○
To Start Up VBCollector...
Choose [Program]-[WebView Livescope]-
[VBCollector Task View] from the Start menu to start
up VBCollector.

Registering a Server

To use VBCollector for downloading pictures from the VB-C50Fi (hereafter referred to as "server"),
the server must first be registered.
Adding a Server
Add a new server to which VBCollector will download pictures.
○ ○ ○ ○ ○ ○
To Add a New Server...
1. To add a server, choose "Add" from the
Server menu, or click the "Add" button on
the Server List dialog box that appeared
when Edit from the Server menu was
selected.
6-10