Table 138 Parameter - Hitachi HDS723020BLA642 Specifications

11.38.6.3
Set Power Condition Timer subcommand
Command Block Output Registers
Register 7
Data
Feature 0
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head 1
Command 1
Error Register
7 6 5
CRC UNC 0
0 0 0
Timer(15:0)
If the new timer value is greater than the maximum value setting, then the device may set the value to the
maximum setting . If the new timer value is less than the minimum setting, then the device may set the value to
the minimum setting.
Timer Units
If the Timer Units bit is cleared to zero, then the Timer (15:0) shall be specified in units of 100 milliseconds. If the
Timer Units bit is set to one, then the Timer (15:0) shall be specified in units of 1 minute.

Table 138 Parameter

6 5 4 3 2 1
- - - - - - -
1 0 0 1 0 1
Power Condition IDs
Table 62
Parameter
Table 138
Timer (15:0)
- 1 D - - -
1 1 0 1 1 1
4 3 2 1
IDN 0 ABT T0N AMN
0 0 V 0
Hitachi hard disk drive specifications
Command Block Input Registers
0 Register 7
- Data -
0 Error
Sector Count -
Sector Number -
Cylinder Low -
Cylinder High -
- Device/Head -
1 Status
Status Register
0 7 6 5
BSY RDY DF
0 0 V 0
200
6 5 4 3 2 1 0
- - - - - - -
...See Below...
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
...See Below...
4 3 2 1
DSC DRQ COR IDX ERR
- - 0 -
0
V