Day/Night Submenu - Bosch VDN-5085 Installation Manual

32 en | Configuration
5.5.3

Day/Night submenu

Item
Day/Night
Switch level
Switch delay
Priority
AM18-Q0648 | v1.0 | 2013.03
Selection
Auto, Color,
Monochrome
-15 to +15
1, 2, 3, 5, 10,
20, 30, 60,
120, 240 s
Motion, Color
Installation Manual
Description
Auto - the camera switches the IR cut-
off filter on and off depending on the
scene illumination level.
Color - the camera always produces a
color signal regardless of light levels.
Monochrome - the IR cut-off filter is
removed, giving full IR sensitivity.
Sets the video level in Auto mode at
which the camera switches to
monochrome operation.
A low (negative) value means that the
camera switches to monochrome at a
lower light level. A high (positive) value
means that the camera switches to
monochrome at a higher light level.
Sets the evaluation time in Auto mode
for day to night transitions.
In AUTO mode:
Color - the camera gives a color image
as long as the light level permits.
Motion - the camera avoids motion blur
as long as the light level permits (it
switches to monochrome earlier than it
would with Color priority).
FLEXIDOME 5000 AN
Bosch Security Systems