GE 15298530 Owner's Manual page 11

D M
IGITAL ESSAGING
S O
ETTING THE
A
NNOUNCEMENT
There are three types of outgoing announce-
ments. All three have default greetings - as
shown below - that can be recorded over.
ANNOUNCEMENT 1: "Please leave your message
after the tone."
ANNOUNCEMENT 2: "Please leave your message
after the tone."
ANNOUNCEMENT 3: "Sorry, no messages
accepted."
To change the announcement, hold the ANS
ON/OFF button until the announcement you
want - 1, 2 or 3 - is shown both in the display
and audibly confirmed by the unit.
If you choose Announcement 3, the unit will
confirm this audibly and ask you to " please
record announcement ." There is no preset limit
of time in which to record your announcement.
UTGOING
TO RECORD AN OUTGOING ANNOUNCEMENT
1. Press the ANS ON/OFF button to select
Announcement 1 or 2.
2. Hold the ANNOUNCEMENT button.
3. Start speaking after the beep. The time
limit is one minute.
NOTE: If you speak directly into the micro-
phone your announcement will be clearer.
4. Release the ANNOUNCEMENT button
when you have finished speaking.
The unit replays the announcement for
confirmation.
TO CHECK AN ANNOUNCEMENT
1. Select the announcement.
2. Tap the ANNOUNCEMENT button.
If there is no announcement recorded, the unit
will play the default announcement.
:
:
11