Installing The Side Stabilizer Kit; Attaching The Lan Cable And Power Cord - NEC Express5800 1080Xd Installation Procedures Manual

Installing the Side Stabilizer Kit

Note
Accessory box.
1. Position a stabilizer bracket on each side of the cabinet.
2. Secure each stabilizer bracket to the cabinet with three M4 screws provided.
See Figure 11.

Attaching the LAN Cable and Power Cord

1. Open the rear door of the server. See Figure 12.
2. Remove the screw securing the ground cable attached to the server rear
door. See Figure 12A.
3. Grasp the rear door and pull it upwards to remove it from the server. See
Figure 12B.
12 Express5800/1080Xd Installation Procedures
: The Side Stabilizer Kit is included in the
A
A Side Stabilizers
Figure 11. Installing the Side Stabilizers
A