GE 10 AZA Owner's Manual page 16

Installation for models AJES and AJHS—with filler panels.
Read these instructions completely and carefully.
8
Install the Window Gasket and the Locking Bracket
Cut the foam top window gasket to the
A
window width.
Stuff the foam between the glass and the
B
window to prevent air and insects from
getting into the room.
9
Replace the Air Conditioner in the Case
Carefully slide the air conditioner back into
A
the case.
Attach the power cord to the base pan with
B
the clamp.
16
Attach the window locking bracket with 1
C
type E screw.
When the wall outlet is to the left, extend the
C
cord under the unit and hold it in place with
the clamp.
Reinstall the locking plate with the tab behind
D
the wall case flange. Tighten the screw.
Locking
plate
Base pan
Tighten
screw
Power cord
Clamp
Reattach the front grille. An opening for the
E
power cord is on the bottom of the front
grille.
Fill holes and cracks with caulking provided
F
by the installer.
Power cord
Clamp