Notices, Compliance And Safety; Copyright Notices; Disclaimer; Trademark And Patent Notice - Hitachi GD8000 User Manual

GD8000 User Guide
Identification: GD8000 User Guide

Copyright Notices

© Copyright 2009 General Dynamics. All rights reserved.
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into
any other language or computer language in whole or in
part, in any form or by any means, whether it be electronic,
mechanical, magnetic, optical, manual, or otherwise, without
the prior written consent of General Dynamics Itronix
Corporation, 12825 E. Mirabeau Parkway, Spokane Valley, WA
99216.

Disclaimer

General Dynamics Itronix reserves the right to revise the
manual and make periodic changes to the content without
a direct or inferred obligation to notify any person of such
revision or changes. General Dynamics Itronix Corporation
does not assume responsibility for the use of this manual, nor
for any patent infringements or other rights or third parties
who may use the manual.
This document contains proprietary information of General
Dynamics Itronix Corporation.
This product is available for purchase under General Dynamics
Itronix's standard terms and conditions of sale. Hardware
products may be reconditioned, or be manufactured from
parts and components that may be new, used, rebuilt, or
recycled and in some cases, the hardware product may not
be new and may have been previously installed. In any event,
General Dynamics Itronix warranty terms apply.

Trademark and Patent Notice

Itronix is a registered trademark of General Dynamics Itronix
Corporation.
Microsoft, MS, Windows, and MS-DOS are registered
trademarks of Microsoft Corporation.
The following United States Patent Numbers apply to any
unit which incorporates a DVD drive - 5,434,678; 5,589,945;
5,913,013; 6,151,444; and 6,208,805.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
ENERGY STAR is a registered trademark of the U.S.
®
Environmental Protection Agency. As an ENERGY STAR
General Dynamics Itronix | 72-0137-003

Notices, Compliance and Safety

partner, General Dynamics Itronix has determined this
computer meets ENERGY STAR program requirements for
computers.

Compliance Statements

The GD8000 computer has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
„ „
Increase the separation between the equipment and receiver.
„ „
Connect the equipment into an outlet on a circuit different from
„ „
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
„ „
help.
The GD8000 computer complies with Part 68 of the FCC Rules.
On the bottom of this equipment is a label that contains,
among other information, the FCC registration number
and ringer equivalence number (REN) for this equipment. If
requested, this information must be provided to the telephone
company.
The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs on the
telephone line may result in the devices not ringing in response
to an incoming call. In most, but not all areas, the sum of the
RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to the line, as determined by
the total RENs, contact the telephone company to determine
the maximum REN for the calling area.
The GD8000 computer may be connected to the telephone
network using the RJ-11 jack provided.
If this equipment causes harm to the telephone network, the
telephone company will notify you in advance that temporary
discontinuance of service may be required. If advance notice
isn't practical, the telephone company will notify the customer
as soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the
operation of the equipment. If this happens, the telephone