Sony FWD42B2/DS Operating Instructions Manual page 59

Parts
8AC IN socket
9 / (main power) switch
0 SPEAKER socket
(FWD-55B2/46B2/42B2)
qa AUDIO OUT (L/R)
(RCA connector)
qs VIDEO
Description
Connect the supplied AC power cord to this socket and to a wall outlet (page 20).
Once you connect the AC power cord and turn on main power switch, the
lights up in red and the display goes into the standby mode.
Turn the main power switch to "ON"(press the side) when setting up the display.
When the main power switch is turned "OFF" (press the
is 0W.
Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on
connecting the speakers, see the operating manual that came with the speakers. For details
on how to route the speaker cords, see page 21.
This is the audio monitor output terminal for external devices. Outputs an audio of the
signal currently indicated on the screen.
Notes
• Settings assigned in "Sound Mode" or "Speaker Out" will not be reflected.
• The noise reduction status set by the remote control is not reflected.
VIDEO IN (BNC): Connects to the video output of a piece of video equipment.
VIDEO OUT (BNC): Connects to the video input of a piece of video equipment. Pictures
input from VIDEO IN will be output. Output regardless of whether the power is on or off
(including standby).
AUDIO IN (Stereo mini jack): Connects to the audio output of a piece of video
equipment.
1
indicator
side), the power consumption
13
GB
GB