Samsung HW-F450/ZA User Manual page 22

Before requesting service, please check the following.
ill _ ii i_i_i _i iii_iiiii_ i __i _
The unit will not turn on.
A function does not work when the
button is pressed,
Sound is not produced. ......
The Picture does not appear on a TV
When the function is selected,
The remote control does not work.
The sound from the left/right
channels are reversed.
The SoundShare (TV pairing) failed.
Is the power cord plugged into
the outlet?
Is there static electddty in the
air?
Is the unit properly connected
to your TV?
Is the Mute function on?
Is the volume set to minimum?
Is the TV connected properly?
Are the batteries drained?
Is the distance between remote
control and main unit too far?
Are the left/nght audio output
cables from the TV connected
properly?
Does your TV support
SoundShare?
Is your TV firmware the latest
version?
Does an error occur when
connecting?
Reset the TV MODE and
connect again.
Connect the power plug to the
outlet.
Disconnect the power plug and
connect it again.
Connect it correctly.
Press the Mute button to
cancel the function.
Adjust the volume.
Connect it correctly.
Replace with new batteries.
Move closer to the unit.
Check the left/nght channel and
connect it/them correctly.
SoundShare is supported by
some Samsung TVs released
after 2012. Check your TV to
see if it supports SoundShare.
Update your TV with the latest
firmware.
Contact the call center.
Press _H button for 5 seconds
to reset the product.
22