Yamaha FX SHO Owner's Manual page 50

Features and functions
ponents for help and convenience in operat-
ing the watercraft.
1 Analog speedometer/tachometer and indi-
cator lights
2 Left multifunction display and operation but-
tons
3 Right multifunction display and operation
buttons (for FX Cruiser SHO)
When the multifunction information center
starts operating, the analog speedometer/ta-
chometer makes one sweep, all displays light
up for 2 seconds, and then the meter starts to
operate normally.
The multifunction information center will con-
tinue to operate for 25 seconds after the en-
gine stops.
45
EJU34930
Analog speedometer/tachometer and indi-
cator lights
This watercraft is equipped with the following
meter and indicator lights.
1 Analog speedometer/tachometer
2 "SPEED" indicator light
3 "WARNING" indicator light
4 "RPM" indicator light
5 "UNLOCK" indicator light
6 "L-MODE" indicator light
EJU36791
Analog speedometer/tachometer
The analog speedometer/tachometer can be
used as a speedometer or a tachometer.
To switch between the speedometer and the
tachometer functions, push the "Speed/RPM"
button for at least 1 second when the multi-
function information center is operating.
The "SPEED" indicator light comes on when
the analog speedometer is selected. The