GE 49-90321 Installation Instructions Manual page 25
For washer models: gbvh5140, gbvh6260, gcvh6260, gcvh6600, ghdvh626, ghdvh6700, wbvh5100, wbvh6240, wcvh6260, wcvh6600, whdvh626 and whdvh660, for dryer models: dbvh510, dbvh512, dcvh5150, dcvh660, dhdvh52, dhdvh66, pbvh415, pcvh565, pdvh515, phdvh52 and
Advertisement
Available languages
Available languages
Installatio
Instructi
Instructions
en fran_ais
: ............
4
Instrucciones
en espa_ol:
...........
8
SBSD13_
SBSD227
ForWasherModels: G BVH5140, G BVH6260, GCVH6260, GCVH6600, GHDVH626,
GHDVH6700 W BVH5100, W BVH6240, W CVH6260, W CVH6600, W HDVH626
andWHDVH660
ForDryerModels: DBVH510, D BVH512, D CVH5150 D CVH660, D HDVH52,
DHDVH66, PBVH415, P CVH565, PDVH515, P HDVH52 and PHDVH57
BEFORE YOU BEGIN
Read these
instructions
completely
and carefully.
• IMPORTANT - Save t hese
instructions
for local
inspector's
use.
• IMPORTANT - Observe all
governing
codes
and ordinances.
• Note to Consumer
- Keep these
instructions
with
your
Owner's
Manual
for future
reference.
• Completion
time
- 1 to 2 hours
• Proper
installation
is the responsibility
of the installer.
• Product
failure
due to improper
installation
is not covered
under
the Warranty.
CAUTION
-
Due to the size and
weight
of these
products,
and to reduce the
risk of personal
injury or damage
to the
product,
TWO PEOPLE ARE REQUIRED
FOR
PROPER INSTALLATION.
• See washer
and dryer
installation
instructions
for additional
installation
requirements
and guidelines.
KiT CONTENTS
4 Support
Pads
4 Mounting
Screws
Drawer Divider
TOOLS YOU WILL NEED
Phillips
Head
Screwdriver
9/16" Open End Wrench
or Adjustable
Wrench
8 mm Socket Wrench
INSTALLATION
PREPARATION
Remove
the packaging.
The Drawer
divider
is taped
at the top of the
shipping
carton.
Remove
the divider
and set
aside
for final
installation.
Flatten
the product
carton
to use as a pad
to lay the washer
or dryer
down
on its side.
Continue
using the carton to protect
the finished
floor
in front
of the installation
location.
_-I REMOVE THE LEVELING
LEGS
[]
Carefully
lay the washer
or dryer
on its
side to access
the leveling
legs on the
bottom
of the appliance.
IMPORTANT:
Do not lay the washer
or dryer
on its back! Do not remove
the shipping
bolts on the back side of the washer.
The
bolts must remain
in place until the washer
is returned
to an upright
position.
[]
Use an open-end
wrench
to remove
the
washer
or dryer
leveling
legs.
Advertisement
