Sony DVW-A500/1 Service Manual page 145

Item
Item number
REMOTE VIDEO
722
CONTROL MODE
INPUT VIDEO
723
BLANK
Sub item
0 ALL LINE
LINE 12
12
|
|
LINE 20
20
(DVW-A500/1
and 500/1)
LINE 9.32
9
|
|
LINE 22.335
22
(DVW-A500P/1
and 500P/1)
724 VIDEO INPUT
(with optional AGC/MANUAL
BKDW-505 for
DVW-A500/1
and 500/1, and
BKDW-506 for
DVW-A500P/1
and 500P/1)
725
VIDEO INPUT
(with optional
MANUAL LEVEL
BKDW-505 for
DVW-A500/1
and 500/1, and
BKDW-506 for
DVW-A500P/1
and 500P/1)
H BLANKING
726
WIDTH
Settable range Function
[0] [composite]
Specifies the type of video process control via the Sony 9-
1 component (Y-R, B) pin remote interface.
0: composite (Video, Chroma, Hue)
1: component (Y, P
Note
Hue cannot be controlled in component mode via 9-pin
remote interface. Hue should be controlled by menu or by
BVR-50.
Specifies whether the blanking is on or off during the
vertical blanking of video input signal.
The blanking line can be selected independently. Y/C and
odd/even signals are blanked simultaneously. The input
signals blanked by specification of these sub items are
recorded on tape.
[0] 0: Blanking is specified for each line.
[– – –]
1
blank 1: All lines selectable by this menu item are blanked, no
2
throu
2: All lines selectable by this menu item are not blanked, no
0 blank
0: Blanked
[2] [throu]
2: Not blanked
0 blank
0: Blanked
[2] [throu]
2: Not blanked
0 AGC Sets the AGC to on or off (manual) for video input signal.
[1] [manual] 0: The AGC is on.
1: The AGC is off (manual).
Set video input signal level when the item 724 is set to "1".
0
0 (HEX)
|
|
[80]
[80 HEX ]
( )
|
|
FF
FF (HEX)
[0] [narrow]
Sets the horizontal blanking width of the video output signal.
1 wide
When analog blanking is selected, the horizontal blanking
width conforms to the RS170A standard (for DVW-A500/1
and 500/1) or CCIR624-3 standard (DVW-A500P/1 and
500/1). Normally, a wide blanking width and a narrowed
picture are used. During editing, "0" is recommended; in
transmission, select "1" to output the signal in conformity
with the respective standard.
0: Digital (narrow) blanking
1: Analog (wide) blanking
P )
B R
matter what the other sub item settings are.
matter what the other sub item settings are.
A-29
Appendix