Advertisement
Available languages
Available languages
Recommended
Settings
IMPORTANT:
•
When the power is on, the temperature
display shows the
actual temperature of the compartment.
•
Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended
setting will not cool
the compartments
any faster.
The recommended
settings should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is firm.
•
If the temperature
is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
To Turn Off/On:
IMPORTANT:
•
Depending on your model you may have a control center with
an On/Off button (Style 1), or you may have a control center
without an On/Off button (Style 2).
•
The On/Off control turns off cooling for both compartments
and turns off the dispenser. It does not disconnect
power to
the refrigerator.
Style I - Press and hold the On/Off button for three seconds.
The red LED will light up to indicate that cooling is Off. Press the
On/Off button again to turn on the cooling. The LED will turn off.
91P
On/Off
Power off
coolin_ ,system
press 3 sec
Style 2 - Press the Freezer (+) pad until OFF appears in the
display. Neither compartment
will cool. Press the Freezer or
Refrigerator (-) pad to turn the cooling back on.
Adjusting
Controls
The REFRIGERATOR control adjusts the refrigerator
compartment
temperature.
The FREEZER control adjusts the
freezer compartment
temperature.
If you need to adjust the temperature
in either the refrigerator or
freezer compartment,
use the settings listed in the chart as a
guide.
To Adjust Set Point Temperatures:
The first touch of the (+) or (-) touch pad displays the current
temperature set point. The display will show the set point for
approximately
3 seconds, and then return to the actual
temperature.
•
Press the (+) or (-) touch pads until the desired temperature
set point is displayed.
NOTE: Except when first turning on the refrigerator, do not
adjust either temperature control more than one setting at a
time. Wait 24 hours between adjustments for the temperature
to stabilize.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
REFRIGERATOR
Control 1° lower
FREEZER too warm/too little ice
FREEZER Control 1°
lower
REFRIGERATOR too cold
REFRIGERATOR
Control 1° higher
FREEZER too cold
FREEZER Control 1°
higher
Additional Control Center Features
Max Cool
The max cool feature assists with periods of high refrigerator use,
full grocery loads, or temporarily
warm room temperatures.
•
Press the Max Cool touch pad to set the freezer and
refrigerator to the lowest temperature settings. Press the Max
Cool touch pad again to return to the normal refrigerator set
point.
NOTE: The Max Cool feature will automatically
shut off in
approximately
2 hours. When Max Cool is on, the
temperature cannot be adjusted.
o
Humidity Control (on some models)
The humidity control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments
or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
•
Press Humidity Control to turn on the door heater. Press
Humidity Control again to turn off the heater. The LED will be
illuminated when Humidity Control is on.
Vacation Mode (on some
models)
In Vacation Mode, the freezer will not automatically
defrost as
often to conserve energy.
•
Press the Vacation Mode touch pad until the indicator light is
lit, to turn on the feature. Press the Vacation Mode touch pad
again, or open either door, to turn off the feature.
Advertisement
