Panasonic AW-HE120KE Operating Instructions Manual page 47

Setting the camera menu items
Color Bars Setup [Off, On]
The setting of this item takes effect only when "59.94Hz"
has been selected as the "Frequency" setting.
It enables the color bar setup level (Off: 0.0IRE or
On: 7.5IRE) of the video output signals to be selected.
Return
Use this to return to the previous menu.
(continued)
 Changing the format 
When the currently selected format is to be changed to
another format on the Output screen, the pre-format-change
confirmation screen is displayed.
Pre-format-change confirmation screen
F o rm a t
D o y o u w a n t t o s e t
F o rm a t (1 0 8 0/ 5 9. 9 4 p( i )) ?
C A NC E L
O . K.
 The format to be set is displayed within the
parentheses on the screen.
 When the cursor is moved to "O.K." on the pre-format-
change confirmation screen and the change is entered,
the post-format-change confirmation screen appears
after the format has been changed.
Post-format-change confirmation screen
F o rm a t
A r e y o u O . K. ?
N o
Y e s
 If the cursor is moved to "Yes" and this selection is
entered, the display returns to the Output screen in the
post-change format.
 If the cursor is moved to "No" and this selection is
entered, the display returns to the Output screen after
the format has been changed back to the pre-change
format.
The same operation is also performed when none of
the unit's controls have been operated for a period in
excess of 10 seconds.
 When an external sync signal which is not supported
by the post-change format has been input, the image
will be disturbed.
In a case like this, either change the external sync
signal or use internal synchronization.
47