3.5.2 T1 Card (KX-NCP1187)
Function
1-port T1 CO line card. EIA/TIA standard compliant.
LEDs
To NT1
Accessories and User-supplied Items
Accessories (included): none
User-supplied (not included): RJ45 connector
CAUTION
•
Connect this optional service card to the CO line through NT1; do not connect to the CO line directly.
•
T1 ports are SELV ports and should only be connected to SELV services.
Note
•
T1 Card must be installed behind an FCC registered and UL or CSA-NRTL listed CSU.
•
To confirm the CO line connection, refer to "Confirming the CO Line Connection" in "3.13.1 Starting
the PBX".
Switch Settings
Switch
A/B
Document Version 2011-10
RJ45
A
B
Type
Usage and Status Definition
Slide
Keep the switch at default A position. Do not change the position
of this switch.
3.5.2 T1 Card (KX-NCP1187)
Installation Manual
69