Replacing The Platen - Toshiba B-852-R Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT

2.7 Replacing the Platen

1) Prior to replacing the platen, print out the maintenance counter for future reference.
2) Open the top cover, and raise the print head block by pressing down the head block release lever.
Top Cover
3) While pulling the top part of the platen holders L and R to the center of the printer, move them to the front
of the printer to remove.
4) Push the platen and strip plate to the left side and then, move them to the front side to remove.
Platen Holder L
5) Remove the shaft holder from the platen.
NOTE: Be careful not to damage the shaft holder when removing it.
Platen
Platen
2-14
2
1
Platen Holder R
Shaft Holder
Strip Plate
Shaft Holder
EO18-33018
2.7 Replacing the Platen
Print Head
Head Block
Release Lever