Epson Power Supply IC S1F70000 Technical Manual page 238

Tape configuration
The tape configuration is shown in the following
figure. Blank sections are provided as a leader and
trailer, with 1,000 SOP2 packages fitted into the com-
ponent mounting section between them. At the begin-
Finish
Trailer (open) > 40mm
S1F70000 Series
Technical Manual
ning of the leader section there is an extra section of
tape which contains the cover tape only.
Base Lead (open) > 40mm
Travel direction
Embossed
carrier
EPSON
Appendix
Start
Cover tape
only
6–15