GE PSB1000? PSB1001 Installation Manual

I
I
tallati
structi
Profile Advantium
TM
120 Built-ln
SpeedCook Ovens
PSB1000 PSB1001
Questions? Call800.GE.CARES (800.432.2737) or visit our Website at:GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completelg
and carefullg.
• IMPORTANT - Save these instructions
for local inspector's use.
• IMPORTANT - Observe all g overning
codes and ordinances.
• Note to Installer- Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these instructions for
future reference.
• Skill level -Installation of this appliance requires
basic mechanical and electrical skills.
• Completion time- 1 hour
• Proper installation is the responsibility of the
installer,
• Product failure due to improper installation is not
covered under the Warranty, See Owner's
Manual for warranty information.
IMPORTANT:
• Use this oven only for its intended purpose,
• Never use the oven for warming or heating a
room, Prolonged use of the oven without proper
ventilation can be hazardous,
-&CAUTION:
For personal safetLI, remove house fuse or oven
circuit breaker before beginning installation to avoid
severe or fatal shock injurLI.
-_ CAUTION:
For personal safetLI, the mounting surface must be
capable of supporting the cabinet load, in addition
to the added weight of the 7S-pound product, plus
additional oven loads of up to 50 pounds or a total
weight of 125 pounds.
-&CAUTION:
For personal safetg this product cannot be
installed in cabinet arrangements such as an island,
a peninsula or below a countertop.
For a Spanish version of this manual,
visit our Website at GEAppliances.com.
Para consultar una version en espafiol
de estemanual de instrucciones, visite
nuestro sitio de internet GEAppliances.com.
CONTENTS
Design Information
Models Available .................................................................... 2
Product Dimensions and Clearances .......................... 2
Tools Required ........................................................................ 2
Parts Supplied ........................................................................ 2
Advance Planning ................................................................ 3
Installation Instructions
Step 1, Slide the Oven into the Cutout ........................ 7
Step 2, Install Bottom Trim ................................................ 7
Step 3, Install Mounting Screws ...................................... 8
Step 4, Finalize Installation ................................................ 8
Installation Preparation
Electrical Requirements .................................................... 4
Prepare the Opening ...................................................... 5, 6
Remove the Packaging ...................................................... 6
PIFL59060902 49-40607 02-09 JR