Sending Faxes - Canon PIXMA MX320 Manual

Sending Faxes

>
Contents Faxing > Sending Faxes
Sending Faxes
This section describes dialing and sending faxes directly using the Numeric buttons.
For details on other ways to send faxes, see
Sending a Fax with the Numeric Buttons
Redialing the Number Dialed with the Numeric Buttons
Adjusting the Sending Quality
Note
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching systems, you have to dial the outside line
access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons
1.
Preparing for sending a fax.
Make sure that the power is turned on.
(1)
Operation Panel
See
Load a document on the Platen Glass or in the ADF.
(2)
Loading Originals.
See
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on the types and conditions of documents which you can fax, see
You Can Load
Press the FAX button.
(3)
The fax standby screen will appear.
Adjust the density (scan contrast) or image quality (fax resolution) as necessary.
(4)
See Adjusting the Sending Quality
2.
Sending the fax.
When the document was loaded on the Platen Glass:
Use the Numeric buttons to dial the recipient's number.
(1)
Press the Color button for color sending, or the Black button for black & white
(2)
sending.
Important
Color sending requires that the recipient's fax machine supports color faxing.
Press the OK button.
(3)
Using Various Sending Functions
.
.
.
Advanced Guide Troubleshooting
.
Originals
Page 59 of 817 pages