Canon 3807B007 User Manual page 902

Network Setting
5.
Select the IPv4 tab. In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask in
Subnet Mask and the default gateway in Gateway Address.
9
6.
Click Set.
7.
Click OK after the Confirmation message is displayed.
884
8.
Exit imagePROGRAF Device Setup Utility.
Specifying the Printer's Frame Type
> Network Setting (Windows)
Important
• You must specify the IP address here to be able to configure NetWare protocol settings using Remo-
teUI.
>
iPF6300