–
Automatic answering configures the device to automatically
answer and incoming call when a headset is detected.
–
Automatic answering timer configures the time delay before
the device automatically accepts the incoming call.
–
Outgoing call conditions configures the connected Bluetooth
device to make outbound calls within one of two settings: Even
when device locked or Only when device unlocked.
• My call sound: allows you to personalize the sounds you hear
during a call with and without earphones.
–
Tap My call sound settings and select Personalize call
sound.
–
Follow the detailed on-screen instructions.
• Use extra vol. for calls: activating this feature places an extra
volume button on your currently active call screen.
• Increase volume in pocket: increases the ringtone volume
when the device is in a pocket or a bag. Uses the proximity
sensor to detect its location.
• Call forwarding: configures call forwarding options.
290
Note: If the Wi-Fi Calling feature is active and connected, the
Call forwarding feature is greyed-out and inaccessible.
• Wi-Fi Calling: Allows you to both activate/deactivate the Wi-Fi
Calling feature and configure its settings.
• Additional settings: allows you to configure additional call
settings. For more information, refer to "Configuring
Additional Voice Call Settings" on page 295.
• Voicemail service: allows you to assign the service.
• Voicemail settings: displays the settings for the voicemail.
• Ringtone: assigns your device's ringtone.
• Vibrate: configures the vibrate settings. Choose from Always,
Only in silent mode, or Never.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to "TTY Mode" on page 294.
• Hearing aids: allows you to enable/disable hearing aid
compatibility. For more information, refer to "HAC Mode" on
page 295.