Setting Intelligent Function Detection Settings - Canon VB-H610D Operation Manual

Setting Intelligent Function Detection
Settings
Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
[Detection Criteria] tab (Except passing detection)
[Detection Criteria] tab (Passing detection)
Image Display Area
(1) [Detection Settings Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Settings Name], ASCII characters
(spaces or printable characters) can be used.
(2) [Area Shape]
Select [Rectangular] or [Polygonal] for the shape of
detection areas you want to set in the image display
area.
(3) [Display Color]
(4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)]
(1)
(2)
(3)
(4)
(5) [Clear detection line]
(6) [Passing Direction]
(1)
(7) [Decision point]
(5)
(3)
(6)
(7)
(4)
Detection Area
For details on detection area setting operations, see
"Setting Detection Areas" (p. 108).
[Clear]
If the [Area Shape] is [Polygonal], the detection area
set in the image display area is deleted.
Choose the color of the detection setting. The color
selected here becomes the display color of the
detection area/line in the image display area.
Set the lower limit for the size, change ratio, and
judgment time for the set detection area to trigger
detection. If the value set here is exceeded, "Detected"
mode is triggered.
Click the text box to enter a value directly, or specify a
value using the slider.
For details on the setting method, see "Setting
Detection Criteria per Detection Type" (p. 109).
Clears the detection line set in the image display area.
Select the passing direction of a moving object
relative to the detection line.
Select the point of a moving object that will be used as
criteria for passing detection when a moving object
crosses a detection line.
Important
It is recommended that the detection criteria are set in a
condition as close as possible to the condition in which the
camera is actually used. Perform a detection test in advance to
make sure that the detection frame continues to be displayed
for a subject targeted for passing detection.
Intelligent Function Setting Tool
6
107