Using the PS Software
For Fuji Xerox:
1. The installation program of the Xerox multifunction/GDI printer will not request you
to make a physical connection between the printer and your computer.
2. When the installation is finished, you will have to establish a link between the
MUTIFUNCTION/GDI printer and your computer in order to use the printer from
your computer. To do this, you need to use PS-Link to link the two devices:
Launch the PS-Link utility and click the [Link] button.
When a connection has been successfully established, the following message will
be displayed. Press OK to exit.
D-Link DPR-2000 - User Manual
35