D-Link DVX-2000MS-10P - VoiceCenter IP Phone Sys 10P Quick Installation Manual page 19

Now that you have the phones connected to the LAN and configured
through Microsoft
the connection and configuration to make sure they work.
Note: You can dial extension numbers in several ways:
• Dial the number, and wait before the connection is made.
• Dial the number, and press OK on the phone (for a faster
connection time).
• Press the Response Point button on the IP Phone, and say the
name of the person you want to call, in this case the name of the
phone user assigned to the phones you just configured.
To test the DHP-125MS IP Phones with the Microsoft Response
Point phone system:
Using the first phone, dial the extension number assigned to the
user on the second phone, and confirm that it rings.
Note: It may take several seconds for the second phone to ring.
Go to the second phone and dial the extension number of the user
on the first phone.
If the phones did not work, the likely cause is a loose connection. Make
sure all cables and cords are properly seated into their respective ports,
jacks, and outlets.
Please see the VoiceCenter user manual for more information.
1
Test IP Phones
Response Point
®
Administrator, it's time to test
™
D-Link VoiceCenter Quick Install Guide