Setting A Route And Displaying Points Of Interest By Voice; Activating Voice Recognition - Pioneer AVIC-505 Owner's Manual

Setting a Route and Displaying Points of Interest by Voice

You can use voice commands to set a route in much the same way as described in
to Your Destination"
by voice.
• You can easily set a route home, to the stored location, or to any listing in the Destination history that
has been specifically named. (See "Settng a Route to Your Destination" for details of the Destination
history and the home and stored locations.)

Activating voice recognition

In a case where no route has yet been set, you can activate voice recognition whenever the
Destination menu or the map is displayed.
The Voice Recognition menu appears (countdown lamps light and change colour one by one),
giving a list of the available options.
The commands that can be given are the following:
• RETURN HOME
Find a route home from your current location. (This appears only if a home location has been
registered; see "Registering your home location" on page 27.)
• GO TO (registered location name)
Find a route to the stored location. (This appears only if a specific location has been
registered; see "Registering locations" on page 52.)
• DESTINATION HISTORY
Find a route to a ticked and named listing in the Destination history.
• DISPLAY POINTS OF INTEREST
Overlay a category of point of interest on the map.
• Remember to give your command before all the countdown lamps have changed colour.
• If you fail to give a voice command before all the countdown lamps have changed colour, the Voice
Recognition menu disappears and the Destination menu or Map display appears once again.
. You may also overlay a specific category of points of interest on the map
"Settng a Route