Behavior At Occurrence Of Error - NEC Express5800 Series User Manual

Express5800 series
Hide thumbs Also See for NEC Express5800 Series:
Table of Contents

Advertisement

times, the startup will be unsuccessful. In this case, turn off the power and then turn it on
again after waiting 30 seconds to boot the server.
IMPORTANT:
Do not set a password before installing the OS.
8.
Upon completion of POST, the OS will start up.

Behavior at Occurrence of Error

If POST or OS startup does not finish normally, the server will reboot itself automatically.
At the time of reboot, it will select the other CPU/IO module and run POST or OS startup.
In this manner, the server retries POST or OS startup with different combinations of CPU/IO
modules. If POST does not finish normally with any combinations, the server will stop with the
state of DC OFF or Post end with an error message displayed.
While performing retries, the server displays or registers the error types.
For details of error messages, see Chapter 7 "Troubleshooting."
POST Error Messages
When the server detects an error during POST, it will display a message on the screen:
The error message are described in "POST Error Messages" (Page 7-4).
CPU/IO Module Status
The CPU/IO module (0 or 1) started first is primary, and the other module becomes secondary. If
primary CPU/IO module is disconnected because of a failure, the other module becomes primary.
The primary CPU/IO module is selected depending on the primary/secondary status of modules
when the server was last shut down or how the power cables were connected.
The following devices are connected to the primary CPU/IO module by a hardware switch, although
they can be connected to both CPU/IO modules 0 and 1. When the primary CPU/IO module is
disconnected they are switched to the secondary module automatically and continue operating.
VGA (display)
USB device (keyboard, mouse, floppy disk drive)
TIPS:
As for DVD-ROM drive, the DVD-ROM drive of both CPU/IO modules 0 and 1 can be accessed.
If one CPU/IO module is disconnected because of the failure, only the DVD-ROM of the other
module can be accessed
.
IMPORTANT:
General Description 2-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8800-103f, exp320hr

Table of Contents