NEC Express5800 series User Manual page 33

[Prepare For Removal]/ [Undo Prepare For Removal]:
Do not use the feature.
It's the function which stops and restarts a revolution of a spindle motor of HDD, but
these are the operation which has no need in particular in an HDD exchange.
When logical drive is selected (in normal state):
[Delete Virtual Disk]:
Select this feature to delete the logical drive.
[Locate Virtual Disk]:
Start to blink LED of Physical disks consists of Virtual disk.
[Stop Locating Virtual Disk]:
Stop to blink LED of Physical disks consists of Virtual disk.
[Check Consistency]:
Check the consistency of the logical drive.
[Start Initialization]:
Initialize the logical drive.
[Set Virtual Disk Properties]:
Allows you to set the read and/or write policies of the logical drive.
When logical drive is selected (in degrading or under rebuild processing):
[Check Consistency] and [Start Initialization] is disabled (removed from the menu) in the
above screen.
Operation 29