Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
Selecting Store Demo
or Home Use
1
2
Selecting a country
Selecting a channel
3
4
Setting the Clock
Mode
5
Viewing the HD
Connection Guide.
6
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.
6
English
Connecting to an Antenna
Plug & Play (Initial Setup)
Press the ◄ or ► button, then press the ENTERE button.
Select the
Home Use mode. Store Demo Mode is for retail
y
environments.
Return the unit's settings from
y
(standard): Press the volume button on the TV. When the OSD
volume is displayed, press and hold
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
Press the ENTERE button, then press the ▲ or ▼ button to select the channel source
to memorise. Press the ENTERE button to select Search. For more information, refer to
Channel → Auto Store. (P. 11)
✎
Press the
ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
✎
If you select the
Auto, select the time zone which you live. (Australia only)
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
or
R-AUDIO-L
Store Demo to Home Use
MENU
for 5 sec.
VHF/UHF Antenna
Cable
ANT OUT
P
P
Y
R
B
POWER
P
SOURCE
0
SOURCE
0
I-II
DUAL
SUBT.