Using The Unit With Other; Televisions - Pioneer PDA-V100HD User Manual

Using the unit with other televisions
Chapter 9
Using the unit with other televisions
Follow the procedures listed below when using this unit
as an AV selector.
Be sure that the power switches of both television set
and this unit are set to off before making connections
and settings.
1 Set the HDMI CONTROL switch to OFF.
CONTROL
2 Connect this unit to other components.
• Be sure power is turned off before making
connections.
• Regarding connections, see section Using with
other components on page 21.
3 Turn power on.
• Turn power on only after connecting all other
components.
4 Confirm that the HDMI CONTROL indicators are
not lighted.
5 Select the input.
• Confirm that the INPUT button and the remote
control unit's INPUT (1 to 6) buttons can be used to
change the source input.
ON/OFF
HDMI
When turning power off:
Press the STANDBY/ON button or the remote control
unit's button to turn power off.
09
17
En