Table of Contents
Advertisement
4. Enter your current zip code and tap Done. This zip code
must correspond to the location of your desired TV and
set top box.
5. From the Find your TV service screen, select a service
provider from the available channel listing.
6. From the Choose your TV Brand screen, tap your TV's
manufacturer name.
• If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either Other TV Brands or I Have a Projector.
7. Aim your device at the TV and tap
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
8. If the TV turned on, tap Yes.
– or –
If the TV did not turn on after tapping
and waiting 10 seconds, tap No or Retry.
176
9. From the Choose Your TV Tuner screen, select the entry
Note: Try matching your current channel selection method.
(Power) to
10. Select the Satellite Box Brand from the available list.
Important! You must configure your set top box for IR
(Power)
that corresponds to your current channel control
method:
• Cable/Satellite/STB/PVR/DVR: selected when changing
channels is done via a receiver box. Channels are not changed
via the TV remote but rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box's remote.
®
For example, DirectTV
.
• If your brand does not appear in the list, tap Other Satellite
Box Brands and follow the on-screen instructions.
communication with your device. If you do not
select More Info.. below and follow the on-screen
instructions you may not be able to properly use
the application.
Advertisement
Table of Contents
