Toshiba e-STUDIO190F Operator's Manual page 140

Info.
Code
730 Cannot retrieve the Journal nor program the Internet
Parameters and the Auto Dialer remotely via email
from a PC.
731 The dialer buffer for manual dialing was full (50
stations) when the Relay Transmission Request was
received.
800/814/ Machine was requested to relay a document or
816/825 Confidential Communication but has no capability.
826 Received Sub-address is not registered in the Auto
Dialer (One-Touch/ABBR. Dialing).
870 Memory overflow occurred while storing documents
into memory for transmission.
871 Overflow of the file management area occurred.
NOTE
140
Problem Solving
Information Code
Meaning
1. After identifying the problem and taking the recommended action, if the Information Codes
keep reoccuring or Information Codes that appear on your machine but are not listed above,
please contact your service representative.
Possible Action
Check that the Fax Parameter No. 158 (PC
Remote Update) is set to "Valid".
Request the sender to resend the Relay
Transmission Request after the reserved
communication is finished.
Check with the other party.
Check the Auto Dialer.
Check the remote station.
1. Transmit documents without storing them
into memory first. Use Direct Transmission
when using G3 Fax Communication.
2. Install Optional Memory (SD Memory
Card).
Wait until the machine finishes printing or
sending the documents.
Page
116
--
--
--
44
144
--