Table of Contents
Advertisement
7.1 Settings for Measurement (Page: 1/3)
COUNT
ERROR
[No.]
ORDER
DATE
Choosing whether to display the serial number on the monitor and
print it out with the result
"
ON
":
Serial number will be displayed on the monitor and
printed/transferred with the result. It counts up after
data is printed/transferred or deleted.
"
":
Serial number will neither be displayed nor printed.
OFF
Choosing whether to count up the serial number when all the mea-
surements result in error. "
choose "
".
ON
"
ON
":
Even when all the measurements result in error, header
(name of the instrument, date, etc.) will be printed and
serial number will count up by pressing the
switch.
"
":
When all the measurements result in error, "
OFF
" will be displayed on the monitor, nothing will
DATA
be printed and serial number will not count up even if
PRINT
switch is pressed.
"6-digit number": Serial number
[How to change the number]
(1) Turn the roller, or press
select the digit. The number of the selected digit will be dis-
played in reverse image.
(2) The number increases when
decreases when
START
"6-digit number": Serial number
[How to change the number]
(1) Turn the roller, or press
select "
".
RESET
(2) Press
START
switch or
Order of displaying the result
"
":
The newest three measurements will be displayed in
SEQU
measurement mode, or the newest 10 measurements in
DISPLAY mode. When "
displayed as "
play.
"
RELI
":
The three measurements of the highest reliability will
be displayed in measurement mode, or the newest 10
measurements in DISPLAY mode. When "
selected, it will be displayed as " "mark on the mea-
surement mode display.
Date and time
"
01
" - "
31
":
Day
– 34 –
" must be set to "
COUNT
switch or
FIXATION
switch is pressed, and
PRINT
switch is pressed.
switch or
FIXATION
PRINT
switch.
" is selected, it will be
SEQU
" mark on the measurement mode dis-
" in order to
ON
PRINT
NO PRINT
switch to
LIMITER
switch to
LIMITER
RELI
" is
Hide quick links:
Advertisement
Table of Contents
