Panasonic KX-T123211D Programming Manual page 8

1. Set the System Program Switch on the KX-Tl23211 to the "EIA"
position.
The display on data terminal will show ;
; Welcome to KX-Tl23211 on-site administration
ver 2.0 Panasonic CO., LTD
; ** Jan. 1. 1988 12:OO'AM **
; The "HLP" displays command informations
n
When you set the programming switch to the "EIA" position, the
system will stop its own normal exchanging operations, disconnect
all the current calls, and connect same extensions to CO lines
directly with the power failure transfer feature.
CO1 will be assigned to extension of jack number 01
CO2 will be assigned to extension of jack number 02
CO5 will be assigned to extension of jack number 09
CO6 will be assigned to extension of jack number 10
CO9 will be assigned to extension of jack number 17
CO1 0 will be assigned to extension of jack number 18
On-site / Remote Administration Start
the "SET" position.
1. Make a call to the line which is beforehand programmed as a DISA
Line on the KX-Tl23211.
Outgoing Message will be heard instead of dial tone.
2. Dial the Remote Security Code (70000 through 79999).
You will hear the answer carrier tone.
3. After the answer carrier tone, set the on-line mode on your data
terminal equipment.
l The display on data terminal will show.
; Welcome to KX-Tl23211 remote administration
; The "HLP" displays command informations' ; The "HLP" displays command informations'
press "HLP" and Carriage Return Keys. You will find the next
command (See page 12-l).
3 - 4
3 - 2
ver 2.0 Panasonic CO., LTD